As an Amazon Associate I earn from qualifying purchases.
Is your Shark vacuum not picking up dirt like it used to? If your Shark vacuum isn’t sucking well or making strange sounds, it might be due to a belt issue. A faulty belt can reduce the performance of your vacuum. In this article, we will show you how you can easily remove the old belt from your vacuum and replace it with a new belt yourself. Our suggestions will make your job easier to solve your problem. Timely belt changes are essential to prolong the life of your vacuum. Stay with us to know.
![How to replace belt on shark vacuum](https://bigfishtavernlaguna.com/wp-content/uploads/2024/03/shark-2-1024x538.jpg)
Determining the Need for Belt Replacement
If your vacuum is not picking up as well, the belt may need replacing.
If the brush roll isn’t spinning or is spinning irregularly, the belt may be the cause.
Visible Damage to the Belt Examine the belt for any signs of wear, such as fraying, stretching, or breakage. Even small damages can impact performance.
Gathering Supplies
Replacement Belt
To be sure of the correct belt for your Cirque vacuum model, check the user manual or search online.
Screwdriver
Most Shark vacuums require a screwdriver to access the belt compartment. You can use any good brand of screwdriver for this task.
Scissors
You may need scissors to remove the old belt and trim the new one to the appropriate length.
Clean Cloth
Having a clean cloth ready can help you wipe away dirt in the vacuum.
Finding the Belt in Your Shark Vacuum
When you’re changing the belt on your Shark vacuum, finding it is key. The belt is like a rubber band that helps the vacuum’s brush roll spin. Now, let’s flip the vacuum over so we can take a look underneath. That’s the part of the vacuum that has bristles on it and helps pick up all the dirt and crumbs from your floors.If we look closely at the brush roll, we should see the belt wrapped around it. The belt is what connects the brush roll to the motor of the vacuum. Without the belt, the brush roll wouldn’t be able to spin properly, and your vacuum wouldn’t be able to clean as well.
Step-by-Step Belt Replacement Guide
![How to replace belt on shark vacuum](https://bigfishtavernlaguna.com/wp-content/uploads/2024/03/belt2-1024x538.jpg)
Step 1: First Unplugging
Ensure the vacuum is unplugged from the power source to prevent any accidents. Place it on a flat surface for easy access.
Step 2: Find a Clear Space
Choose a spot where you have plenty of room to work. It could be a table or a clean floor space. Make sure there’s enough light so you can see what you’re doing.
Step 3: Access the Belt Compartment
The location of the belt compartment may vary depending on the model of your Shark vacuum. Refer to your user manual for specific instructions on accessing the belt compartment. In most cases, you’ll need to remove the brush roll cover or bottom plate to expose the belt and brush roll.
Step 4: Remove the Old Belt
Gently remove the brush roll from the vacuum. The old belt will be wrapped around it.Carefully slide the old belt off the brush roll. You might need to wiggle it a bit.Throw away the old belt in the trash. It’s done its job!
Step 5: Install the New Belt
Slide on the New Belt: Take the new belt and slide it onto the brush roll in the same spot where the old one was.Make sure the new belt is on securely and in the correct position.
Step 6: Reassemble the Vacuum
Put the new belt on, then reassemble the vacuum. Attach the brush roll cover or bottom plate. Tighten screws or clips to secure everything.
Step 7: Test the Vacuum
Before you start using your vacuum cleaner again, do a quick test to make sure the belt is working properly. Plug in the vacuum, turn it on, and observe the brush roll for smooth rotation. If everything looks good, congratulations! You’ve successfully changed the belt on your Shark vacuum.
Tips For Maintaining Shark Vacuum Belts
Check Regularly: Every few months, take a look at your vacuum belt. Make sure it’s not worn out or damaged.
Clean Around the Brush Roll: Dirt and hair can get wrapped around the brush roll, causing the belt to wear out faster. Keep it clean to avoid this.
Replace When Needed: If you notice your vacuum isn’t working as well as it used to, it might be time to replace the belt. Follow the instructions to do it safely.
Store Properly: When you’re not using your vacuum, store it in a dry place away from moisture and extreme temperatures. This will help prolong the life of your belt.
Frequently Asked Questions
Q: How often should I replace the belt on my Shark vacuum?
A: It’s recommended to replace the belt every 6 to 12 months, depending on usage and the condition of the belt.
Q: Can I use any belt for my Shark vacuum, or does it have to be a specific one?
A: It’s essential to use the belt specified for your Shark vacuum model to ensure proper fit and function.
Q: What should I do if the new belt keeps slipping off?
A: Check for any obstructions or debris hindering the belt’s proper alignment and ensure it’s installed according to the manufacturer’s guidelines.
Q: Is belt replacement covered under warranty?
A: Warranty coverage varies by manufacturer and may not typically include wearable parts like belts. Refer to your warranty documentation for details.
Q: Can I lubricate the belt to prolong its lifespan?
A: No, vacuum belts should not be lubricated, as it can attract dust and debris, leading to premature wear and potential damage.
Conclusion:
Replacing the belt on a Shark vacuum is not a difficult task. You can do it easily by following our guide.By doing what the maker says and being careful, you can change the belt and make sure your vacuum works well. Don’t forget to pick the right belt for your Shark vacuum and go slowly to do it right.
Amazon and the Amazon logo are trademarks of Amazon.com, Inc, or its affiliates.
Leave a Reply